Generally speaking, the steps of sink installation are as follows: fixed position - install faucet and water inlet pipe - sink on the table top - overflow hole, filter screen sealing - install supporting pendants - drainage test - edge banding - cleaning.
1. Fixed position


2. Install the faucet and water inlet pipe Before installing the sink, the faucet and water inlet pipe should be installed first, and the water inlet pipe at the other end needs to be connected to the water inlet switch.
3. Place the sink on the countertop



4. Install the matching pendant

5. Drainage test

6. Edge banding
Once the drain test has been done to ensure that there is no problem, the sink can be edge-banded. When using silicone edge sealing, it is necessary to ensure that the connection gap between the sink and the table top is even, and there can be no water seepage.
7. Clean up